Coal washing equipment vibration dual control complex medium volume sorter big, body weight, a subsidiary of parts is greater, the installation can be done in two steps. The first step will be divided body parts after the assembly, the second part of equipment installation. Coal washing equipment installation sequence dual vibration control complex media sorter: 1, in order to facilitate the combination and alignment when installing horizontal alignment first chassis, the chassis along the length and width direction of the horizontal error of less than 0.5mm; 2, chassis alignment and after fixation. Installation can be carried out of the body. First, the lower body lifting in place, and is located in the foundation beam. Check whether the body again next feeding position consistent with the requirements of the drawings. Then, according to the provisions of positioning, alignment, and finally fixed link for embedded parts; 3, installed on the body, and lower body symmetry with bolts and fixed. Links between the upper and lower body plus seal pad and hit the sealing pad and hit the sealant. Lap cushion adoption curve links, to prevent leakage. When screwing bolts should be unscrewed four corners, and then tighten the symmetric uniform strength to prevent deformation. 

keywords: Coal washing equipment , , ,